OIL ADDITIVES

 

ENGINE OIL ADDITIVE

Description

GESEL HEINZ Engine Oil Additive is a high-performance, fully-synthetic engine oil additive package to reduce friction and wear in gasoline and diesel engines. Due to the formation of a heavy-duty lubricating film friction between all metal parts will be significantly reduced. At the same time, the engine will be cleared from deposits, which is leading to a smooth running of the engine. Oil and fuel consumption will be reduced. GESEL HEINZ Engine Oil Additive protects the engine and increases its service life.

Advantages
Excellent smooth-running properties due to significant reduction of friction
Optimizing of engine performance and increase of engine service life
Increases cost effectiveness of the engine due to reduction of oil and fuel consumption
Reduces emissions thanks to anti-friction-properties

Application
Content of the can is sufficient for up to 5 litres of engine oil. Add to the fresh oil after oil change.

ENGINE FLUSH

Description

GESEL HEINZ Engine Flush is a highly effective combination of active agents for a reliable and professional cleaning of the engine interior. Damaging deposits and black sludge will be removed and the whole engine interior will be cleaned. In this way, optimum conditions are created to secure an efficient performance of the fresh oil and the service life of the engine will be increased. GESEL HEINZ Engine Flush supports the optimum functioning of the whole lubricating system, which is also improving the economy of the engine. Damages to the engine can be prevented. At the same time, emissions are reduced.

Advantages
Reliable removal of deposits and sludge accumulation in the engine interior.
Customer-friendly and gentle application for DIY or in the workshop.
Neutral to seals and other engine components.
Creates optimum working conditions of the fresh oil.
Protects the lubricating system and prevents damages to the engine.

Application
Content of the can sufficient for up to 5 litres of engine oil. For application during regular workshop service. For optimum cleaning result it is recommended to add GESEL HEINZ Engine Flush 200 km before the intended oil change.



 

MOTOR OIL SAVER

Description

GESEL HEINZ Motor Oil Saver is a highly effective combination of active agents, which replenish rubber and plastic engine seals and provide reliable engine performance. It stabilises the lubricating fi lm and reduces engine noise. At the same time, GESEL HEINZ Motor Oil Saver optimises oil consumption and protects against oil loss.

Advantages
Increase of the viscosity index of the engine oil.
Replenishes engine sealants.
Prevents environmental pollution caused by oil loss.
Prevents blue smoke in the exhaust gas.
Suitable for all commercially available engine oils.

Not suitable for use in motorbikes with wet clutches!

Application
GESEL HEINZ Motor Oil Saver is perfectly suitable for all common gasoline and diesel engines with and without diesel particulate fi lters. It can be added at any time, when oil loss problems appear. After adding GESEL HEINZ Motor Oil Saver, let the engine run until regular working temperature has been reached. 300 ml are suffi cient for 5 litres of engine oil. The optimum effect starts to come up after 600 – 800 km. If necessary, it is recommended to add GESEL HEINZ Motor Oil Saver in combination with every oil change.



OIL SMOKE STOP

Description

GESEL HEINZ Oil Smoke Stop replenishes engine sealants and reduces oil consumption through piston rings and valve guides. It also prevents viscosity loss. GESEL HEINZ Oil Smoke Stop avoids pollutive oil patches on the street or in the garage and prevents blue smoke formation within the exhaust gas. It also extends the service life of catalytic converters. GESEL HEINZ Oil Smoke Stop can be used in all common engine oils.

Advantages
For gasoline and diesel engines
Prevents blue smoke formation within the exhaust gas.
Replenishes engine sealants.
Prevents environmental pollution caused by oil loss.
Prevents viscosity loss.
Improves engine compression and reduces engine noise.

Not suitable for use in motorbikes with wet clutches!

Application
After adding GESEL HEINZ Oil Smoke Stop, please let the engine run until regular working temperature has been reached. 300 ml are suffi cient for 5 litres of engine oil. Please do not exceed a mixing ration of 20 %! Please use GESEL HEINZ Oil Smoke Stop in combination with every oil change.



 

CERA PLUS

Product description

GESEL HEINZ CERAPLUS has been developed in cooperation with one of the worldwide leading German manufacturer of automotive additives. CERAPLUS combines the advantages of a powerful engine oil additive with the special effectiveness of a ceramic-based solid lubricant. This specific combination decreases the direct contact of metal surfaces inside the engine, which is significantly reducing wear and friction over a long period of time. This has a positive effect on the service life of the engine, fuel consumption as well as on the engine smoothness. CERAPLUS can be used in combination with all conventional engine oils.



Application
Please shake well before use! Add CERAPLUS immediately after the change of the engine or gear oil. One can of CERAPLUS is sufficient for 5 litres of oil. Oil change intervals of the car manufacturers have to be followed.

Not suitable for the application in automatic gears and motorbikes with wet clutches.



 

AUTOMATIC TRANSMISSION CLEANER

Description

GESEL HEINZ Automatic Transmission Cleaner is a state-of-the-art automatic transmission flushing fluid based on low-viscosity detergents. Highly cleaning active surfactants provide reliable and complete dissolution and dispersion of deposits inside the automatic gearbox oil-circulation system. Please only apply in torque converters using Automatic Transmission Fluids according to DEXRON specification!

Advantages
Excellent cleaning results due to highly active surfactants.
Removes deposits inside the automatic gear box.
Eliminates shifting problems caused by dirty automatic gear boxes.
Supports an optimum shifting of the automatic gear.
Contains additives for simultaneous lubrication during the cleaning process.
Compatible with all types of ATF according to DEXRON specifi cation.

Application
Please add GESEL HEINZ Automatic Transmission Cleaner to the ATF under hot running conditions. When filling in GESEL HEINZ Automatic Transmission Cleaner, please do not go below minimum oil level and do not exceed maximum oil level! Let the engine run for 10 minutes in neutral gear and switch at least two times into all gearshift lever positions. After the cleaning process, immediately change the ATF according to the car manufacturer instructions and let the engine run for a few minutes.