AUTOMATIC TRANSMISSION FLUIDS

 

ATF CVT 7500

Product description

GESEL HEINZ ATF CVT 7500 is produced using selected HC synthetic base oils and a special additive technology. It has been developed specifically to meet the special requirements in CVT drives with push and pull belts. GESEL HEINZ ATF CVT 7500 is recommended for use in many ‘non-stepped’ automatic transmissions (CVT). Here, it is characterised by its excellent metal/metal friction coefficients and outstanding torque transmission. The fluid filling specifications and the manufacturer’s service intervals must be observed.

GESEL HEINZ ATF CVT 7500 is not suitable for use in hybrid CVT (Honda/Ford), DCT/DSG (dual-clutch transmissions) or stepped automatic transmissions.

Product advantages
Outstanding economy grade for CVT applications.
The most advanced technology for excellent metal/metal friction coefficient performance and friction coefficient stability.
Unvarying good drive performance over the entire service interval.
Excellent behaviour at low temperatures.
The best wear protection properties for reliable operation and the longest service life.
Outstanding ageing and oxidation stability.
GESEL HEINZ ATF CVT 7500 is a special ATF. We advise against mixing it with conventional Automatic Transmission Fluids (ATF). In order to exploit the full product benefits of GESEL HEINZ ATF CVT 7500, a complete oil change is strongly recommended when changing from one transmission fluid to another.

Specification
This product is recommended when the following filling instructions are required:

Audi/VW TL 52 180 (G 052 180)/TL 52 516 (G052 516)
BMW EZL799/EZL799A/8322 0 136 376/8322 0 429 154
Daihatsu Amix CVTF-DC/-DFE
Dodge/Jeep NS-2/CVTF+4/MOPAR CVT 4
Ford - CFT23/WSS-M2C928-A/CFT30/WSS-M2C933-A/Motorcraft, XT-7-QCFT/MERCON C
GM/SATURN DEX-CVT/CVTF I-Green2
Honda HMMF/HCF-2
Kia/Hyundai SP-CVT 1
Mazda CVTF 3320
MB CVT 28/236.20
Mini EZL799/EZL799A/ZF CVT V1
Mitsubishi DiaQueen CVT Fluid J1/J4/SP-III
Nissan NS-1/-2/-3
Punch EZL 799/EZL 799A
Renault ELFMATIC
Toyota/Lexus CVT TC/FE
Subaru NS-2/Lineatronic CVTF/i-CVTF/K0425Y, 0710/CV-30/e-CVTF
Suzuki CVTF 3320/TC/NS-2/CVTF Green-1/-2



ATF DCG II 7700

Product description

GESEL HEINZ ATF DCG II 7700 is a high-performance, dual-clutch gearbox oil based on special HC synthetic oils in conjunction with the most advanced additive technology. Specially aligned to particular wear and friction coefficient requirements in modern dual-clutch gearboxes with high torques. GH ATF DCG II 7700 has been adapted to the special requirements of modern dual-clutch gearboxes that run in oil baths. Its optimised friction system ensures the slip-free transmission of high torques, thus making spontaneous and sporty shifting operations possible over the entire service interval. Due to selected HC synthetic base oils, GH ATF DCG II 7700 provides a constant friction coefficient level and maximum wear protection, even at the lowest external temperatures as well as in extreme heat and under excessive loads.

GH ATF DCG II 7700 is not suitable for use in ‘stepped’ automatic transmissions or CVT (Continuously Variable) drives.

Product advantages
Adapted friction coefficient behaviour for spontaneous and sporty shifting operations.
Excellent friction coefficient stability over the entire service interval.
The best wear protection properties for reliable operation and the longest service life.
Excellent shifting characteristics at low temperatures.
Highest oxidation and ageing stability due to special HC synthetic base oils.
Minimal tendency to foam.
• Reliable protection against corrosion, wear, sludge accumulation and adhesion.
• Neutral behaviour towards gasket materials.
• Miscible and compatible with other dual-clutch gearbox oils of the same specification. However, in order to exploit the full product benefits of GH ATF DCG II 7700, a complete oil change is strongly recommended.

Specifications

This product is recommended when the following filling instructions are required:

Ford WSS-M2C936-A
BMW DCTF-1/FFL-4/MTF-5
Chrysler 68044345EA
• Ferrari TF DCT-F3
• Fiat 9.55550-MZ6
• MB 236.21/236.25
• Mitsubishi DiaQueen SSTF-I (MZ320065)
• Porsche 999.917.080.00/FFL-3
• PSA 9734.S2
• Renault BOT 450/DC4
• Volvo 1161838/1161839
• VW/Audi G 052 182 (DQ250/DQ500)/G 052 529 (DL 501)


 
ATF TOPTECH 7100

Product description

GESEL HEINZ ATF TOPTECH 7100 is an Automatic Transmission Fluid (ATF) of the DEXRON IIIG generation. Its exceptional performance capacity is achieved through the interaction of selected HC synthetic base oils and special additives. For use in automatic transmissions, steering systems and hydraulics in passenger cars, commercial vehicles and construction machinery. GH ATF TT 7100 has been developed specifically to ensure good cold properties and friction coefficient stability. It is used in a variety of units according to the manufacturer’s specification. It is thus used in manual and automatic transmissions, power steering systems, power-shift clutches as well as in power transmission fluid in many hydraulic applications.

GH ATF TT 7100 is not suitable for use in DCT/DSG (dual-clutch) or CVT (continuously variable or ‘non-stepped’ automatic) drives.

Product advantages
Very good economy grade for multi-functional use in many units.
Improved friction coefficient stability.
Outstanding shifting characteristics at low temperatures.
Very good wear protection properties for reliable operation and service life.
Very good ageing and oxidation stability.
Minimal tendency to foam.
Protection against corrosion, wear and deposits.
Neutral behaviour towards gasket materials.
Miscible and compatible with other ATF. However, in order to exploit the full product benefits of
GH ATF TT 7100, a complete transmission fluid change is recommended.

Specification
MAN 339 Type V1/Z1
Voith 55.6335.xx (G607)
ZF TE-ML 04D, 14A (ZF registration No. ZF001938)

The quality of this product is equivalent to EU regulations

DEXRON IIIG    MERCON        Allison C-4        CAT TO-2
Ford M2C195-A    MB 236.1, MB 236.5    ZF TE-ML 02F, 03D, 09, 11B, 17C



ATF TOPTECH 7200

Product description

GESEL HEINZ ATF TOPTECH 7200 is a high-performance ATF with an extremely wide range of applications in modern ‘stepped’ automatic transmissions. Its exceptional performance capacity is achieved through the interaction of the most advanced additives and specially selected HC synthetic oils. GH ATF TT 7200 is a multi-functional ATF that combines the requirements of the most common specifications from American, European and Japanese manufacturers.   

GH ATF TT 7200 is not suitable for use in DCT/DSG (dual-clutch) or CVT (continuously variable or ‘non-stepped’ automatic) drives.

Product advantages
Outstanding ATF economy grade.
Simplified warehousing procedures.
Excellent shifting characteristics at low temperatures.
Permanently high friction coefficient level.
The best wear protection properties for reliable operation and the longest service life.
Outstanding ageing and oxidation stability.
• Minimal tendency to foam.
• Reliable protection against corrosion, wear, sludge accumulation and adhesion.
• Miscible and compatible with other ATF. However, in order to exploit the full product benefits of
GH ATF TT 7200, a complete transmission fluid change is recommended.


Specifications
MAN 339 Type V1/Z11/Z2   
• Voith 55.6335.xx (G607)    
• ZF TE-ML 04D, 14B, 16L, 20B (ZF registration No.ZF001937) 

The quality of this product is equivalent to EU regulations:

• DEXRON IIIH
• MERCON/MERCON V    
• Allison C-4
• MB 236.6, MB 236.9
• ZF TE-ML 17C


Additionally this product is recommended when the following filling instructions are required:
 

• Aisin Warner JWS 3309/3314
• Allison TES 295/TES 389
• BMW LA-2634/LT-71141/ETL 7045 E
• Chrysler ATF+3/+4
• Ford M2C195-A/202-B/922-A1/WSS-M2C924-A/938-A
• GM 9986195
• Honda Z1
• Hyundai/Kia/Mitsubishi SP-II/-III
• MAN 339 Type V2/Z3
• MB 235.71/236.10/236.11/236.91
• Nissan Matic-D/J/K
• Toyota T-IV/JWS 3309
• Voith H55.6336.xx (G1363)
• Volvo 97341/Volvo 5-Speed (1161540)
• VW 50 160/TL 52 162/G 052 990/G 055 025
• ZF TE-ML 02F, 11B, 14C 



ATF TOPTECH 7300

Product description

GESEL HEINZ ATF TOPTECH 7300 is a high-performance ATF with the most modern design and meets the highest requirements of the latest GM specification DEXRON VI. Eminently suitable for use in modern ‘stepped’ automatic transmissions and steering systems.GH ATF TT 7300 is recommended for use in modern ‘stepped’ automatic transmissions and hydraulic steering systems in passenger cars, vans and commercial vehicles. Since DEXRON VI for GM applications is strictly backward compatible, GH ATF TT 7300 can also be used in units that require the former DEXRON specifications (IIIH, IIIG, IIE, etc.).

GH ATF TT 7300 is not suitable for use in DCT (dual-clutch) or CVT (continuously variable or ‘non-stepped’ automatic) drives.

Product advantages
The most advanced technology for outstanding performance and stability of the friction coefficient.
Improved ease of shifting, especially for older automatic transmissions.
Consistently good shifting performance over the entire service interval.
Excellent shifting characteristics at low temperatures.
The best wear protection properties for reliable operation and the longest service life.
Outstanding ageing and oxidation stability.
• Minimal tendency to foam.
• Reliable protection against corrosion, wear, sludge accumulation and adhesion.
• Miscible and compatible with other ATF. However, in order to exploit the full product benefits of
GH ATF TT 7300, a complete transmission fluid change is recommended.


Specifications

The quality of this product is equivalent to EU regulations

DEXRON VI

Additionally this product is recommended when the following filling instructions are required:

BMW ETL 7045 E/ETL 8072 B
MB 236.41



ATF TOPTECH 7400

Product description

GESEL HEINZ ATF TOPTECH 7400 is a low-viscosity, high-performance ATF based on the most advanced additives and specially selected HC synthetic oils. It has been specially designed to meet the requirements of modern ‘stepped’ automatic transmissions in sport utility (SUV), mid-size and luxury vehicles.
GH ATF TOPTECH 7400 has been adapted to the special requirements of modern ‘stepped’ automatic transmissions that are installed in high-performance vehicles from the upper mid-range and luxury class, but also in SUV. Its high friction coefficient level ensures the slip-free transmission of high torques, thus making spontaneous and sporty shifting operations possible. GH ATF TT 7400 is therefore especially recommended for vehicles that are often driven at a quick pace and at full power. Its excellent friction coefficient stability guarantees consistently good shifting performance over the entire service interval.

GH ATF TT 7400 is not suitable for use in DCT/DSG (dual-clutch) or CVT (continuously variable or ‘non-stepped’ automatic) drives.


Product advantages
Adapted friction coefficient behaviour for spontaneous and sporty shifting operations.
Prevention of friction vibrations in a reliable manner.
Excellent friction coefficient stability over the entire service interval.
Reduced viscosity for better fuel efficiency.
Excellent shifting characteristics at low temperatures.
The best wear protection properties for reliable operation and the longest service life.
• Outstanding ageing and oxidation stability.
• Minimal tendency to foam.
• Reliable protection against corrosion, wear, sludge accumulation and adhesion.
• Neutral behaviour towards gasket materials.
• Miscible and compatible with other ATF. However, in order to exploit the full product benefits of
GH ATF TT 7400, a complete transmission fluid change is strongly recommended.
 

Specifications

This product is recommended when the following filling instructions are required:
MERCON SP
MERCON LV
BMW 83 22 0 142 516 (BMW 1375.4)/83 22 2 355 599
(BMW ATF 6)
Ford WSS-M2C938-A
Honda DW-1
Hyundai SP-IV
Jaguar Fluid 8432
Land Rover TYK5000050
Mazda FZ
Nissan Matic S
Toyota Type WS
VW/Audi G 055 005



ATF TOPTECH 7600

Product description

GESEL HEINZ ATF TOPTECH 7600 is a high-performance ATF with reduced viscosity based on the most advanced additives and a special base oil composition made of HC synthetic oils and fully synthetic poly-alpha-olefins (PAO). Developed specifically for use in modern 6/8/9-speed automatic transmissions in SUV, mid-size and luxury vehicles.
GH ATF TT 7600 has been adapted to the special requirements of modern 6/8/9-speed automatic transmissions in high-performance SUV and vehicles from the upper mid-range and luxury class. Its specific friction coefficient level ensures the slip-free transmission of very high torques, thus making spontaneous and sporty shifting operations possible without compromising comfort. In so doing, its excellent friction coefficient stability guarantees unvarying shifting performance over the entire service interval.

GH ATF TT 7600 is not suitable for use in DCT/DSG (dual-clutch) or CVT (continuously variable or ‘non-stepped’ automatic) drives.


Product advantages
Adapted friction coefficient behaviour for spontaneous and sporty shifting operations.
Prevention of friction vibrations in a reliable manner, thus providing maximum comfort.
Excellent friction coefficient stability over the entire service interval.
Reduced viscosity for better fuel efficiency.
Excellent shifting characteristics at low temperatures.
The best wear protection properties for reliable operation and the longest service life.
• Highest oxidation and ageing stability due to a special base oil composition made of HC synthetic and fully synthetic PAO base oils.
• Minimal tendency to foam.
• Reliable protection against corrosion, wear, sludge accumulation and adhesion.
• Neutral behaviour towards gasket materials.
Miscible and compatible with other ATF of the same specification. However, in order to exploit the full product benefits of GH TT ATF 7600, a complete oil change is strongly recommended.


Specifications

This product is recommended when the following filling instructions are required:

Chrysler 68157995AA
BMW 83 22 2 152 426/83 22 2 305 397 (BMW L12108)/83, 22 2 289 720 (ATF3+)
Fiat 9.55550-AV5
• Jaguar 02JDE 26444
• Land Rover LR023288
• VW/Audi G 060 162/G 055 540
• ZF S671 090 312



ATF TOPTECH 7800

Product description

GESEL HEINZ ATF TOPTECH 7800 is a low-viscosity, high-performance ATF based on the most advanced additives and specially selected HC synthetic oils. It has been specially designed to meet the requirements of modern 6-speed automatic gears produced by Asian car manufacturers. Its high friction coefficient level ensures the slip-free transmission of high torques, thus making spontaneous and sporty shifting operations possible. GH ATF TT 7800 is therefore especially recommended for vehicles that are often driven at a quick pace and at full power. Its excellent friction coefficient stability guarantees consistently good shifting performance over the entire service interval.

GH ATF TT 7800 is not suitable for use in DCT/DSG (dual-clutch) or CVT (continuously variable or ‘non-stepped’ automatic) drives.


Product advantages
Adapted friction coefficient behaviour for spontaneous and sporty shifting operations.
Prevention of friction vibrations in a reliable manner.
Excellent friction coefficient stability over the entire service interval.
Reduced viscosity for better fuel efficiency.
Excellent shifting characteristics at low temperatures.
The best wear protection properties for reliable operation and the longest service life.
• Outstanding ageing and oxidation stability.
• Minimal tendency to foam.
• Reliable protection against corrosion, wear, sludge accumulation and adhesion.
• Neutral behaviour towards gasket materials.
• Miscible and compatible with other ATF. However, in order to exploit the full product benefits of
GH ATF TT 7800, a complete transmission fluid change is strongly recommended.
 

Specifications

This product is recommended when the following filling instructions are required:
MERCON SP
MERCON LV
BMW 83 22 0 142 516 (BMW 1375.4)/83 22 2 355 599
(BMW ATF 6)
Ford WSS-M2C938-A
Honda DW-1
Hyundai SP-IV
Jaguar Fluid 8432
Land Rover TYK5000050
Mazda FZ
Nissan Matic S
Toyota Type WS
VW/Audi G 055 005



ATF TOPTECH 7900

Product description

GESEL HEINZ ATF TOPTECH 7900 HIGHTEC ATF 9004 is a high-performance ATF based on the most advanced additives and specially selected HC synthetic oils. It has been specially adapted to the requirements for Mercedes-Benz 7-speed automatic transmissions (NAG-2).
GH AFT TT 7900 has been adapted to the special requirements for Mercedes-Benz 7-speed automatic transmissions (NAG-2, model 722.9). Its optimised friction system ensures smooth shifting operations, even when the vehicle is driven at full power, and is maintained over the entire service interval. GH ATF TT 7900 is backwards compatible with the former MB 236.12 and replaces this in almost every case (observe the manufacturer’s fluid filling specifications!). GH ATF TT 7900 ensures noticeably improved ease of shifting, especially in rear-wheel drive vehicles with 5-gear automatic transmissions and a regulated converter lockup clutch (model 722.6). GH ATF TT 7900 is also recommended for vehicles equipped with an MB automatic transmissions from other manufacturers (e.g. Chrysler Crossfire, Ssang Yong, etc.).
    
GH ATF TT 7900 is not suitable for use in DCT/DSG (dual-clutch) or CVT (continuously variable or ‘non-stepped’ automatic) drives.

Product advantages
Adapted friction coefficient behaviour for spontaneous and sporty shifting operations.
Prevention of annoying friction vibrations and grinding during shifting in a reliable manner.
Excellent friction coefficient stability over the entire service interval.
Excellent shifting characteristics at low temperatures.
The best wear protection properties for reliable operation and the longest service life.
Outstanding ageing and oxidation stability.
Minimal tendency to foam.
• Reliable protection against corrosion, wear, sludge accumulation and adhesion.
Neutral behaviour towards gasket materials.
Miscible and compatible with other ATF. However, in order to exploit the full product benefits of GH ATF TT 7900, a complete transmission fluid change is strongly recommended.

Specifications

This product is recommended when the following filling instructions are required:
MB 236.14
SSANG YONG